HQRP 2-Pin JT-2G Moisture Analizer Gauge Tester Wood / Drywall and Home Inspection Tool plus HQRP Coaster Review

Average Reviews:

(More customer reviews)This meter is terrible. First, listen to some quotes from the tiny 4 page "manual".
"Thank you for purchase our Products. Please read this manual first before use it. It will tell you how to use it and simply inspect it so as to exert the ruggedization and durable of it's merit..."
Seriously, I'm not making this up! By the way, the poor grammar is not mine! I'm typing this stuff word for word.
Now listen to #6 on the "Notes" page;
"It has a large impact on wood moisture in some conditions, such as Special wood, different temperature, the wood growing up in different place. The simple moisture meter is just based on one kind of wood, and it has not the correction function on Special wood, different temperature, the wood growing up in different place. So the different meter will have the different measuring value."
Now tell me, WHAT????
So when I tell you that the meter gives me a different reading from one side of a piece of split wood to the other, it seems that from the above statement it's not the meter's fault.
I mean how do I know if I have "Special wood"? Or if my wood "grow up in different place"?
Sorry, this meter, as well as it's useless manual, was a waste of my money.
And none of the "simple moisture meter is just based on one kind of wood" talk can be found on the page you view when you order the product.
My unit has the word REMODIFICATION! on the serial number label. I didn't see that on the order page either.
Buy a better meter than this. And I would recommend one made in the good ole USA!


Click Here to see more reviews about: HQRP 2-Pin JT-2G Moisture Analizer Gauge Tester Wood / Drywall and Home Inspection Tool plus HQRP Coaster

Products trademarked HQRP are marketed and sold exclusively by Osprey-Talon. 2-pin version, it is easier to insert and it will leave only 2 little holes instead of 4! 2-pin version, it is easier to insert and it will leave only 2 little holes instead of 4! General Features: Digital large size LCD display; 2-pin version; Model # HQ-2G; Test Range: 5% to 40%; Resolution: 1%; Accuracy: ??1%; Measuring Range: 5% - 40%; High resolution and quickly response; Can hold value; Symbol and unit display, read and get conveniencly Low battery symbol "-+"; Power: one 9V battery INCLUDED; Dimension: 126x70x29mm; Operation temperature: 0'C to 40'C. Here is our buyer's feedback: I got this for checking firewood. Works great

Click here for more information about HQRP 2-Pin JT-2G Moisture Analizer Gauge Tester Wood / Drywall and Home Inspection Tool plus HQRP Coaster

Read More...

General Tools MMD5NP Non-Invasive Moisture Meter Review

Average Reviews:

(More customer reviews)I was excited to receive this moisture meter, as I had a set of resawn walnut boards to check for uneven moisture content on the inside and outside faces. My excitement turned to mild concern when I started to read the instructions: "Press either button to active the sensor". OK, I can roll with that, I guess, although a later item, "Buzzer sounds when the reading changes every increasing digit" left me somewhat bemused. Funnily enough, the instructions also included a disclaimer: "Notice: we are not responsible for typographical errors". Um, OK, then who is responsible?
Anyway, I "actived" the sensor, pressed it as described to one of my boards and...got a reading of 59.9% (the maximum). "Hmm", I thought, "those boards have been drying for two years - that can't be right." So, I tried a piece of beech, nice and dry when I bought it, that's been in my shop for a year or so, planed mirror smooth and thus eliminating the chance that a rough surface could be the problem, and got a reading of 8.0%. "That's more like it!", I thought, "Maybe my first attempt was a just a fluke." Then I re-measured the beech that had given me a believable reading. This time, I got 14%. Another attempt netted me 29%, then 7.4%. So, I tried a few other pieces of wood, with similarly wildly varying results. Fooling around with the unit, I found that pressing more on one corner or the other would cause huge swings in the reported measurement. When I held it in my left hand, I got a different result than when I held it in my right hand. Five minutes later, it was back in its box and on its way to the Amazon returns department.
Maybe this was just a defective unit. Who knows?


Click Here to see more reviews about: General Tools MMD5NP Non-Invasive Moisture Meter

Our non-invasive digital moisture meter is ideal for measuring moisture content in wood, lumber, timber and other and building materials. This highly accurate moisture meter also works well for measuring moisture content in storage environments.• Moisture display on LCD• Data hold to freeze reading and display• Auto calibration• Low battery indication• Sense 6 different materials including 50 types of wood/timber• Audible sound when 'peak' detection• Auto power offIncludes: • 1 "9V" batterySpecifications:Measuring moisture from 0.0% ~ 99.9% with 10 different groups Resolution : ±1 digit Sense depth maximum 3/4" (20mm)NOTE: We will not pay for the shipping fee of a replacement if the item is defective.

Get 18% OFF

Click here for more information about General Tools MMD5NP Non-Invasive Moisture Meter

Read More...

HQRP JT-4G Wood / Firewood Moisture Meter - Wood, Firewood, Wall Damp Meter 4-Pins and Home Inspection Tool Review

Average Reviews:

(More customer reviews)I bought this meter about 1 month ago because my firewood was not burning as well as I had hoped, and I wanted to diagnose the problem. I have found the JT-4G meter to be useful for this purpose.
I can't vouch for the absolute accuracy of its readings (I don't have an independent method for testing this), but at least the relative values make sense. My logs, nominally 16" long and mostly oak, maple and some birch, were split and dried for 1 or in some cases 2 seasons (in Massachusetts, during two unusually wet summers). The moisture readings at the cut ends are typically around 15-20%, which is within the recommended range for firewood. However, when I re-split them to diagnose the problem, I found a consistent pattern of higher moisture readings in the middle of the newly exposed surfaces (typically 25-30%). Thus, the meter has confirmed that my logs are drying primarily from the cut ends and that they have not been dried for long enough. Birch logs gave lower readings than oak or maple - perhaps because birch dries better or perhaps because the calibration of the device is not absolutely precise across different tree species. Commercial pine lumber (2x4's) gave readings around 5% or lower - ie much drier, as one would expect.
I also checked whether the orientation of the pins relative to the grain makes a difference, ie whether you align the long gaps with the grain or across the grain, or whether you stick the pins into the transverse cut such that they are parallel to the rain. In general my readings were consistent between the three orientations. So the orientation doesn't seem to matter.
The meter is easy to use. The 4 pins seem reasonably strong, although my intuition is that they could probably bend if I pushed with maximum strength. You do need to push a bit - I find that if they are not properly pushed into the wood, I get artifactually low readings. My sense is that once they are pushed in beyond 1mm or so, further pushing has little effect (that's important - the meter would be unreliable if the reading were proportional to the force, but once beyond a certain threshold I don't think this is the case).
Minor gripes - the yellow cap is difficult to remove, and the instructions are written in poor English, although the meaning is clear enough. It recommends checking the calibration by pressing it onto your fingertip - this worked as advertised. (I wonder whether the reading depends on skin conductance, and whether you could also use the device as a polygraph. But that's an experiment for another day....)
There are much more expensive meters available - I assume woodworkers who care about precision or about not scratching the surface would choose those more expensive models. But for testing your firewood this one seems to get the job done.

Click Here to see more reviews about: HQRP JT-4G Wood / Firewood Moisture Meter - Wood, Firewood, Wall Damp Meter 4-Pins and Home Inspection Tool

Products trademarked HQRP are marketed and sold exclusively by Osprey-Talon. Digital Wood Moisture Meter. - High resolution and response quickly Data hold; - Digital large size LCD display; - Measures the containing water of wood, bamboo, cotton,tobacco, paper, foodstuff etc. General Features: - Digital large size LCD display; - Model # JT-4G; - 4 steel sharp probes; - Test Range: 5% to 40%; - Resolution: 1%; - Accuracy: ??1%; - Measuring Range: 5% - 40%; - High resolution and quickly response; - Can hold value; - Symbol and unit display, read and get conveniencly; - Low battery symbol "-+"; - Power: one 9V battery INCLUDED; - Dimension: 144x94x50mm; - Operation temperature: 0'C to 40'C. Here is our buyer's feedback: I got this for checking firewood. Works great

Click here for more information about HQRP JT-4G Wood / Firewood Moisture Meter - Wood, Firewood, Wall Damp Meter 4-Pins and Home Inspection Tool

Read More...

Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool Review

Average Reviews:

(More customer reviews)After reading an online review, I was excited about getting this. I have a Stanley Oddjob which I carry in shop apron and thought this might be an improvement. It is promising, with one major flaw. You must completely remove the brass knob to change positions. It is a royal pain. The point is convenience and convenience is the ability to use the functions interchangeably, flowing from on task to another. Doing that requires you to remove and reconfigure the tool between tasks. It is going back. I will just never use it. My combination square, although not a shop apron item, can easily perform a 90, 45 and depth gauge/scribe without reconfiguration. Kreg, go back to the drawing board.

Click Here to see more reviews about: Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool

Multi-Mark redefines what it means to be a multi-purpose tool. Simple, yet durable design takes place of the T-square, torpedo level, depth gauge, story stick, and much more.Transfer measurements while installing ceramic tiles.Set reveal on a door frame or ensuring accurate spacing between face-frame rails.

Get 21% OFF

Click here for more information about Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool

Read More...